TYPE B – Angled staircase section

If you have a standard staircase, with the handrail running from a newel post at the bottom of the stairs to a newel post at the top, then this is the kit for you.

To see more information about this product and the associated measuring guides, scroll down the the ‘description’ below.

Handrail Type
Glass Panel Type
Height (measurement A) - provide measurement in mm
Length (measurement B) - provide measurement in mm
Length (measurement B) - provide measurement in mm is a required field.
Angle (between newel post and baserail)
Left or Right?
Include Base Rail?
Category:

Description

 

The TYPE B section is any angled section which runs up a staircase. These sections must have a suitable newel post at the top and bottom of the stairs, which is at least 90mm wide. There should also be a stringer or base rail running the length of the stairs, in the centre of the two newel posts. Our systems are NOT suitable for open tread staircases, as our glass clamps fit the bottom of the glass and the clamps are screwed into the stringer.

This system includes:

  • Made to measure glass panels, which will all be identical in size and allow for 25mm horizontal gaps either side of each panel.
  • Brushed stainless steel or American oak handrail (if selected), which is cut to size and has all glass clamps pre-fitted to the correct location.
  • All additional clamps, fixtures, and fittings are included as standard.
  • Glass templates (if you include a handrail in your order) to make setting handrail height very easy, as well as a spacer block to make it easy to set the correct space between each glass panel, and a production sheet which shows you exactly where to put your glass clamps.

 

** The measuring guides below should be viewed on laptop/desktop, as the images do not load correctly on mobile devices **

TO SEE OUR STAIRCASE MEASURING GUIDE WHEN KEEPING YOUR EXISTING HANDRAIL, PLEASE CLICK HERE.

TO SEE OUR STAIRCASE MEASURING GUIDE WHEN HAVING NEW STAIRFURB HANDRAIL, PLEASE CLICK HERE.

*If ordering oak products from us, please see our oak information guide for advice on storage and treatment.

*products may vary from images shown.

*Please note that all the required glass clamps and handrail brackets will be included in your price. These are made from brushed stainless steel.

*All StairFurb systems require a closed string staircase, with a stringer that is at least 22mm wide (which is the width of our glass clamps, which will fit onto the string).

*newel posts are NOT included in this system. They must be ordered extra.