TYPE B – Angled staircase section

£0.00

This system includes:

  • Made to measure glass panels, which will all be identical in size and allow for 50mm horizontal gaps either side of each panel.
  • Brushed stainless steel or American oak handrail (if selected), which is cut to size and has all glass clamps pre-fitted to the correct location.
  • All additional clamps, fixtures, and fittings are included as standard.
  • Glass templates (if you include a handrail in your order) to make setting handrail height very easy, as well as a spacer block to make it easy to set the correct space between each glass panel, and a production sheet which shows you exactly where to put your glass clamps.

TO SEE OUR STAIRCASE MEASURING GUIDE, PLEASE CLICK HERE.

Handrail Type
Glass Panel Type
Height (measurement A) - provide measurement in mm
Length (measurement B) - provide measurement in mm
Newel Post Angle (measurement C) (Please provide the angle within one decimal place. Do not just round up/down to the nearest degree)
Handrail & Base Rail Angle (measurement D) (Please provide the angle within one decimal place. Do not just round up/down to the nearest degree)
Category:

Description

The TYPE B section is any angled section which runs up a staircase. These sections must have a suitable newel post at the top and bottom of the stairs, which is at least 90mm wide. There should also be a stringer or base rail running the length of the stairs, in the centre of the two newel posts. Our systems are NOT suitable for open tread staircases, as our glass clamps fit the bottom of the glass and the clamps are screwed into the stringer.

TO SEE OUR STAIRCASE MEASURING GUIDE, PLEASE CLICK HERE.

TO GET A QUICK PRICE ESTIMATE, PLEASE CLICK HERE

See the measuring guide video below.

*If ordering oak products from us, please see our oak information guide for advice on storage and treatment.

*products may vary from images shown.

*Please note that all the required glass clamps and handrail brackets will be included in your price. These are made from brushed stainless steel.

*All StairFurb systems require a closed string staircase, with a stringer that is at least 22mm wide (which is the width of our glass clamps, which will fit onto the string).

*newel posts are NOT included in this system. They must be ordered extra.