ODD SHAPE Staircase Section

The StairFurb Odd Shape Staircase kit enables you to have a stylish glass balustrade even if your handrail is unable to run the full length of the stairs.

Please see information about this product and links to the associated measuring guides in the ‘Description’ below.

Handrail Type
Glass Panel Type
Stringer Length (measurement A) - provide measurement in mm
Stringer Length (measurement A) - provide measurement in mm is a required field.
Height (measurement B) - provide measurement in mm
Upper Height (measurement D) - provide measurement in mm
Horizontal Length (measurement C) - provide measurement in mm
Angle
Left or Right?
Include Base Rail?
Category:

Description

If your staircase handrail goes from the bottom newel post into the ceiling, then the ‘odd shape’ staircase section is for you.

This system includes:

  • Made to measure glass panels, which will all be identical in size and allow for 25mm horizontal gaps either side of each panel.
  • Brushed stainless steel or American oak handrail (if selected), which is cut to size and has all glass clamps pre-fitted to the correct location.
  • All additional clamps, fixtures, and fittings are included as standard.
  • Glass templates (if you include a handrail in your order) to make setting handrail height very easy, as well as a spacer block to make it easy to set the correct space between each glass panel, and a production sheet which shows you exactly where to put your glass clamps.

PLEASE NOTE: If you include a new handrail from StairFurb with your new Odd Shape section, please be aware that we will provide your handrail longer than required, allowing you to trim it down. You will need a suitable cutting device, dependent upon the material of your handrail.

If your ceiling (or upper vertical section if you have one) isn’t quite plum then you will need to expect that the gaps around your glass panels won’t be perfect. Our systems do allow for a bit of tolerance, since we have 25mm gaps either side of each glass panel and you can slightly tweak the position of a glass panel in the clamps, but if your newel posts/ceiling/stringer are not straight then you can’t expect all the gaps to be perfect.

 

** The measuring guides below should be viewed on laptop/desktop, as the images do not load correctly on mobile devices **

TO SEE OUR ODD SHAPE STAIRCASE MEASURING GUIDE WHEN KEEPING YOUR EXISTING HANDRAIL, PLEASE CLICK HERE.

TO SEE OUR ODD SHAPE STAIRCASE MEASURING GUIDE  WHEN HAVING NEW STAIRFURB HANDRAIL, PLEASE CLICK HERE.

If ordering oak products from us, please see our oak information guide for advice on storage and treatment.

*products may vary from images shown.

*newel posts are NOT included in this system. They must be ordered extra.

*All StairFurb systems require a closed string staircase, with a stringer that is at least 22mm wide (which is the width of our glass clamps, which will fit onto the string).