FITTING
Fitting your new StairFurb glass balustrades and handrails is designed to be very straightforward, making it an achievable for any capable DIY’er.
FITTING INSTRUCTIONS
EMBEDDED GLASS
In a nutshell, this is how simple the fitting process is for embedded glass systems. See the video for full instructions.
Cut and remove existing spindles, baseball and handrails. Use filler and paint the newel posts as necessary.
Place the pre-cut baserail into position and fix it down with the supplied screws, through the pre-drilled holes.
Place glass panels into the embedded channel, sit the handrail on top and mark handrail position on newel post.
Place handrail in position and secure it with the supplied fixing components.
FITTING INSTRUCTIONS
CLAMPED GLASS
In a nutshell, this is how simple the fitting process is for clamped glass systems. See the video for full instructions.
Cut and remove existing spindles and (if being replaced) baserail and handrails.
Place the pre-cut baserail (with holes pre-drilled) into position and fix bottom clamps with the screws supplied.
Hold handrail brakets in the correct position and mark the screw holes with a pencil, then drill pilot holes. The handrail bracket heights are clearly shown on the production sheets which are provided with your delivery.
Fix the handrail brackets to the ends of the handrail and by tightening the grub screw and fix the handrails to the newel posts using the screws provided.
Starting at the bottom of the stairs and working your way up, place the bespoke glass panels into position (using the spacer block provided to set the correct gap either side of the glass) in the clamps and tighten the clamps with an 8mm Allen Key.
Video tutorials
You can see the full StairFurb fitting guides above or view the short video tutorial which will make it clear how to simply fit your new clamped glass stair products.
fitting spigot newel post
We advise that any newel posts are fitted by a skilled professional, as they are integral to the stability of the balustrade system. If you are confident in your ability to safely fit the newel posts and choose to fit them yourself, this video explains how to do so.
FIND A FITTER
Our products are all designed to be DIY installed, hence StairFurb does not offer an internal fitting service. If you are not able or confident to fit the components yourself then you can always use one of the many online tradesman searching websites (such as trustatrader.com or mybuilder.com) to find a handyman or carpenter to fit the system for you. If you struggle to find a fitter, you may want to try contacting M.G Stair Fitting on matt.stairfitting@yahoo.com.
Alternatively, you can upload some photos of your existing setup and submit them with your information using the form below. These will be forwarded directly to M.G Stair Fitting. While we can’t be liable for work conducted by any fitter, Matt and his team are very familiar with StairFurb products, cover much of the country, and have successfully installed many of our systems in the past